Steel Dragon Tools® MD40 Magnetic Drill Press with HSS Annular Cutters

This package includes the Steel Dragon Tools MD40 Magnetic Drill Press and choice of Steel Dragon Tools 7-piece or 13-piece, 1-inch cut depth or 2-inch cut depth, high-speed steel annular cutter kit.

The Steel Dragon Tools MD40 Magnetic Drill Press will accept up to 2-inch, high-speed steel annular cutters with a maximum boring diameter of 1-1/2 in. (40 mm). This magnetic drill press will attach directly to the metal drilling surface with a powerful electromagnet. The electromagnet has 2,700 lbs. of max force and ensures the machine will not move during the drilling process.

A secured magnetic drill press provides more leverage than a hand drill, allowing the operator to cut even, consistent holes. The magnet also allows the drill to operate upside down.

Available high-speed steel annual cutter kits at 1-inch or 2-inch cut depth:

• 7-Piece, 1-Inch Depth: 9/16 in., 11/16 in., 13/16 in., 15/16 in., 1 in., and 1-1/16 in.
• 7-Piece, 2-Inch Depth: 9/16 in., 11/16 in., 13/16 in., 15/16 in., 1 in., and 1-1/16 in.
• 7-Piece, 1-Inch Depth: 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., and 3/4 in.
• 7-Piece, 2-Inch Depth: 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., and 3/4 in.
• 13-Piece, 1-inch Depth: 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 13/16 in., 7/8 in., 15/16 in., 1 in., and 1-1/16 in.
• 13-Piece, 2-inch Depth: 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 13/16 in., 7/8 in., 15/16 in., 1 in., and 1-1/16 in.

MD40 Features:

• Suitable for drilling on any metal surface.
• Rack and pinion gear system for exact drilling depth.
• One (1) year warranty against manufacturer defect.

MD40 Specifications:

• Motor: High-Speed Series, Induction, 1,100 W, 110 V, 60 Hz, 15 A
• Max Magnetic Force: 2,700 lbs. (12,000 N). Thinner metal will result in less force.
• Maximum Boring Diameter: 1-1/2 in. (40 mm)
• Maximum Boring Depth: 7-1/2 in.
• Tool Holder: 3/4-inch Weldon Shank
• Spindle Speed: 670 RPM
• Overall Weight: 30 lbs.

Annular Cutter Features:

• SDT annular cutters will drill large holes up to ten times faster than regular drills bits.
• Machine-finish hole with no reaming needed when using lubricant.
• Make overlapping holes, slotting holes, and edge cuts.
• Bit size is etched on each cutter.
• Pilot pin helps locate center of hole location.
• Pilot pin helps eject slug after drilling is complete.
• During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.

Annular Cutter Specifications:

• Kits includes six (6) or 13 high-speed steel annular cutters and one (1) or two (2) pilot pins.
• Cutting Depth: 1 in. or 2 in.
• 3/4 in. Weldon Shank