Nozzles
-
Raptor Blast 1/4" Brass Quick Connect 65 Degree Soap Nozzle
$5.99 -
Raptor Blast 1/4" Stainless Steel Quick Connect 25 Degree Nozzle
Price From: $5.99 -
Erie Tools Quick Connect 40 Degree 3.0 to 6.0 Orifice Pressure Washer Nozzles
Price From: $5.99 -
Erie Tools Pressure Washer 1/4in. Quick Connect 25 Degree 3.5 Nozzle
$5.99 -
Erie Tools Quick Connect 15 Degree 3.0 to 6.0 Orifice Pressure Washer Nozzles
Price From: $5.99 -
Raptor Blast 1/4" Stainless Steel Quick Connect 40 Degree Nozzle
Price From: $5.99 -
Raptor Blast 1/4" Stainless Steel Quick Connect 15 Degree Nozzle
Price From: $5.99 -
Erie Tools Quick Connect 25 Degree 3.0 to 6.0 Orifice Pressure Washer Nozzles
Price From: $5.99 -
Erie Tools Pressure Washer 1/4in. Quick Connect 0 Degree 4.5 Nozzle Tip
$5.99 -
Erie Tools® 1/4" Quick Connect 65 Degree Pressure Washer Soap Nozzle
Price From: $5.99 -
Raptor Blast 1/4" Stainless Steel Quick Connect 0 Degree Nozzle 3.0-6.0
Price From: $5.99 -
Erie Tools Quick Connect 0 Degree 3.0 to 6.0 Orifice Pressure Washer Nozzles
Price From: $5.99 -
Erie Tools 1/8" Male NPT Screw Type Nozzle for Easy Glide Pro Surface Cleaners
$6.99 -
Erie Tools Pressure Washer 2nd Story 4000 PSI Jet Soap 120° Nozzle
$6.99 -
Erie Tools High Low Pressure Washer Nozzle Holder with 1/4" Female Inlet/Outlet
$7.99
The orifice size of the nozzle determines the operating pressure of your machine. As a rule of thumb, the smaller the orifice, the greater the restriction of water flowing through the machine. This causes the pressure to increase.
- Choosing a nozzle with too large of an orifice will reduce operating pressure.
- Choosing a nozzle with too small of an orifice will limit water flow and possibly create an excessive load on the machine.
Use the table above to select the properly sized nozzle for your machine. Determine the nozzle size by matching the operating pressure (PSI) of your machine to the gallons per minute (GPM).