Steel Dragon Tools® JK150 Pipe Hole Cutter with seven-piece hole saw kit. Kit includes M14-30 arbor and comes in a plastic case. Bit sizes include 1-1/4 in., 1-1/2 in., 1-3/4 in., 2 in., 2-3/8 in., and 2-11/16 in. with a 2-inch cut depth.
The Steel Dragon Tools JK150 pipe hole cutter is designed to cut up to 6-inch diameter holes in unpressurized pipe up to 12-inches in diameter. A built-in level will assure excellent alignment when cutting multiple holes for fittings or welded saddles. The heavy-duty keyed chuck can accommodate a variety of hole saws and hole saw arbors, with chuck sizes from 1/8 in. to 5/8 in. An integral motor and gear reduction optimize the performance of large diameter hole saws.
The Steel Dragon Tools JK150 is ideal for mechanical and industrial applications with the ability to cut through a variety of materials. This pipe hole cutter is powered by a 1,500-watt motor with a drill chuck speed of 110 RPM under no load. The hole cutter features a cast iron housing coated in industrial-strength enamel paint with a sealed ON/OFF switch. The 11-foot power cord is protected by a GFCI with a built-in circuit breaker.
Steel Dragon Tools® JK150 Pipe Hole Cutter Specifications:
- Hole Cutting Capacity: 4 in. (114 mm)
- Pipe Mounting Capacity: 1-1/4 in. to 8 in. (32 mm to 220 mm)
- Drill Chuck Capacity: 1/8 in. to 5/8 in. (3 mm to 16 mm)
- Drill Chuck Speed: 110 RPM (no load)
- Travel: 4 in. +/- 0.125
- Motor Specs: 500 W, 110 V, Induction
- Comparable to RIDGID® motor.
- Spring-loaded ball bearing release handle for dual side operation.
- Can be used for dry or oiled hole cutting.
- Stand is not included.
- Compatible stand: SDT-460
Hole Saw Specifications:
- Bit Sizes: 1-1/4 in., 1-1/2 in., 1-3/4 in., 2 in., 2-3/8 in., 2-11/16 in.
- Cut Depth: 2 in.
- Includes M14-30 arbor with 7/16-inch HEX shank.
- Plastic case with foam insert.
- For use on metal pipe, wood, plastic, and PVC.
- Bits are made from M3 high-speed steel.
