This package includes the Steel Dragon Tools® MD45 Magnetic Drill Press and the Steel Dragon Tools® 7-piece, 2-inch cut depth high-speed steel annular cutter kit.
The Steel Dragon Tools® MD45 Magnetic Drill Press with 2,700 lbs. of magnetic force ensures the press will not move during operation. This press will attach directly to the metal surface to drill precision holes quickly and safely. The Steel Dragon Tools® MD45 offers a maximum boring depth of 7 in. and maximum boring diameter of 1-3/4 in. The MD45 has an MT2 spindle taper and comes with an MT2 to 3/4-inch Weldon Shank and MT2 to MT1 converter.
A secured magnetic drill press provides more leverage than a hand drill, allowing the operator to cut even, consistent holes. The magnet also allows the drill to operate upside down.
A full line of 1-inch and 2-inch HSS annular cutters by Steel Dragon Tools® are available.
Specifications:
- Model: MD45
- Suitable for drilling on any metal surface.
- Adjustable base for precision drilling.
- Motor: 1200 W, 110 V, 50/60 Hz
- Max Magnetic Force: 2,700 lbs. (12,000 N). Thinner metal will result in less force.
- Maximum Boring Diameter: 1-3/4 in. (45 mm)
- Maximum Boring Depth: 7 in. (180 mm)
- Spindle Speed: 0-500 RPM
- Spindle Taper: MT2
- Includes MT2 to 3/4-inch Weldon Adapter spindle adapter.
- Includes MT2 to MT1 converter.
- One (1) year warranty against manufacturer defect.
Annular Cutter Features:
- Steel Dragon Tools® annular cutters will drill large holes up to ten times faster than regular drills bits.
- Machine-finish hole with no reaming needed when using lubricant.
- Make overlapping holes, slotting holes, and edge cuts.
- Bit size is etched on each cutter.
- Pilot pin helps locate the center of hole location.
- Pilot pin helps eject slug after drilling is complete.
- During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.
Annular Cutter Specifications:
- Kit includes six (6) high-speed steel annular cutters and one (1) pilot pin.
- Bit sizes included: 9/16 in., 11/16 in., 13/16 in., 15/16 in., 1 in., and 1-1/16 in.
- Cutting Depth: 2 in.
- 3/4 in. Weldon Shank
- Pilot Pin: 1/4 in. x 4 in. (6.34 mm x 103 mm)
