Dragway Tools 6-Ton Hydraulic Shop Press Benchtop with Plates H Frame

MSRP: $325.00
(You save $68.01 )
Free Shipping
(3 reviews) Write a Review
67.00 LBS

Dragway Tools six-ton hydraulic benchtop press with press plates. The press should be mounted to a benchtop. This press is ideal for removing and installing bushings, bearings, gears, ball joints, u-joints, pulleys, and gears. Includes (2) two 5-1/4 in. x 2-3/4 in. press plates.


  • Open construction allows work on long pieces.
  • Bolted, adjustable cross beams raise and lower for an ideal working distance.
  • Heavy-duty springs quickly return the ram.
  • Constructed with premium 2-1/4-inch tube steel (0.200 thick).
  • Press Plate Bar Dimensions: 10 in. x 3/4 in.
  • Press plate bar is a perfect size for bushings and bearings.
  • Includes (2) two press plates.
  • Press Plate Dimensions: 5.25 in. x 2.75 in. x .500 in.
  • Overall Dimensions: 15-1/4 in. (W) x 19-3/4 in. (D) x 36-1/2 in. (H)
  • Capacity: 6 Tons (12,000 lbs.)
  • Working Distance Width: 12 in.
  • Working Distance Height: 2 in. to 10 in.
  • Net Weight: 60 lbs.
  • One (1) year warranty against manufacturer defect.

WARNING! This product can expose you to chemicals including lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, go to

Overall Depth:
Overall Height:
Overall Width:
Hydraulic Tools

3 Reviews

  • 5
    would buy this hydraulic press again .

    Posted by nerdboy on 15th Oct 2014

    Perfect for motorcycle clutch bearings or any small bearing that has to be pressed in or out.
    Excellent press for the price I paid.

  • 5
    Best Cheapo Hydraulic press you can buy

    Posted by Sam Engardio on 29th Sep 2014

    Great design in comparision to the compretitors in the price range. It's not a high quality press, for $89 you're not buying a high quality anything. The bottle jack in this unit is rated at 6 tons, however it has more power than the 12 ton press I bought from Harbor freight, needless to say, that press went back to harbor freight, along with the 6 ton A frame press I purchased from that store. I'd recommend this press to anyone that's on a budget, it's a great bang for the buck.

  • 1
    It was not welded straight do not buy.

    Posted by Stinger on 31st Aug 2013

    Very unhappy with press the mid bar was welded not straight the shaft with the plate was bent and one of the spring ring was bent flat when I got it poor quality.